Intravenous solution control device (Infusion Pump), brand Medcaptain, model SYS-70
“Quality brand products High resolution and accuracy can be used safely”
Purpose of use
1. Used to control the administration of intravenous solutions or nutrients in patients. including infant patients
2. Used to control drug administration which requires precision in the dosage given intravenously.
1. Product details
The machine weighs approximately 1.5 kilograms and has a carrying handle. It can be set on a table or attached to a normal IV pole. that can be used in patient buildings
Use with an alternating current voltage of 100-240 volts, 50 hertz and can use electricity from a Lithium battery for 5 hours (at a solution flow rate of 25 ml. per hour).
Compatible with at least 4 standard saline infusion sets.
Meets international safety standards Type CF, Class I and IP34.
There is a USB 3.0 port for software updates.
2. Detailed technical specifications
Can choose from no less than 8 modes of use: Rate, Time, Trapezia, Weight, Loading Dose, Sequence, Drip, Micro.
Infusion Rate
2.1 The solution can be given at a rate of 0.1 -1,500.0 ml./hr., which can be increased or decreased by 0.01 ml./hr. in the range of 0.10-99.99 ml./hr.
– 0.1 ml./hr. in the range 100-999.9 ml./hr.
– 1 ml./hr. in the range 1,000 – 1,500 ml./hr.
2.2 Can determine the total volume range of solution delivery. Can be in the range of 0.1-9,999 ml., which can be adjusted to increase or decrease by 0.01 ml. in the range of 0.10-99.99 ml.
– 0.1 ml. in the range 100-999.9 ml.
– 1 ml. in the range 1,000 – 9,999 ml.
There is a KVO system that can set the flow rate from 0.1-30.0 ml. per hour after the complete solution has been given as set.
There is a system to detect air bubbles in the line. You can choose the size of the bubbles at 7 levels: 25, 50, 100, 200, 300, 500 and 800 microliters.
3.5-inch color LCD touch screen for adjustment and display of various values. The brightness can be adjusted to 10 levels and the screen can be locked.
The time can be set from 00:01 to 99:59 hours.
Bolus Rate can be set from 0.1 to 1,500 ml/hr without pressing the button to stop the machine. There are 3 types to choose from: Automatic, Manual and Rapid quantitative.
Purge Rate at 1,500 ml. per hour.
Flow rate KVO mode can adjust the flow rate from 0 1-5.0 ml/h.
Warning system (Alarm) both light and sound in various cases as follows:
1. There is a blockage in the line, such as OCCL and Up OCCL.
2. Low Battery
3. Battery Empty
4. There are air bubbles inside the cable (Air Bubble)
5. Finished giving the solution (Finished)
6. Power cord disconnected (No Power Supply)
7. Warning before blockage occurs within the line (Pre OCCL)
8. Leave the machine turned on unused after installing the IV set (Reminder Alarm).
