High-flow nasal cannula (high-flow nasal cannula)

Brand Owgels, model OGM-70E

Category:

High-flow nasal cannula, Owgels brand (model OGM-70E)

Objective : Increase the concentration of oxygen levels in the body. To reduce the rate of endotracheal intubation In patients with respiratory problems

1. Details

High pressure nasal oxygenator, Owgels brand , model OGM-70E

– Size (width x length x height) 34 x 23.8 x 16.9 cm.

– Weight 3.5 kilograms

– Power used 350 watts

– Use AC power 220 V 50 Hz.

2. Feature details

– Oxygen concentration adjuster (Oxygen blender)

 Oxygen levels can be adjusted from 21-100% in steps of 1 liter/minute.

 There is an Oxygen Analyzer which is a type of Ultrasonic Oxygen concentration sensor to check the concentration of oxygen.

– The machine can adjust the flow rate (Flow rate).

 The air flow rate can be adjusted from 2 – 70 liters / minute.

 in child mode Who want to use Low flow mode can adjust the air flow rate 2 – 25 liters / minute.

– Humidity and temperature generator

 The machine is divided into 2 parts: the heat generating part and the part that creates humidity

– System with automatic temperature indication numbers Able to read temperature values ​​on the radiator (Chamber) precisely

– The temperature can be set from 31 – 37 °C.

– Humidity < 10 mg/L at temperature 31 °C

– Humidity < 10 mg/L at temperature 34 °C

– Humidity < 33 mg/L at temperature 37 °C

– It takes approximately ≤ 30 minutes to warm up the machine.

– Displayed with a digital screen Convenient to use

– Can be connected with an oxygen generator. and oxygen tank The temperature of the air from the oxygen supply must not exceed 43 °C.

– There are various warning signs on the screen with 4 functions:

 Low-Higher than normal concentration alert or set

 Clock symbol notification when the set time is approaching.

 Temperature symbol warning When the machine detects abnormal temperatures within the system

– Notification with sound, 9 functions including:

 When the machine detects that the air pipe or air pipe is not connected properly, is leaking, or is clogged, there is a problem and damage. until unable to send air to the user

 Notification when found Position for connecting pipes or equipment It was connected in the wrong position. or in the wrong direction

 When the machine detects Air flow rate lower than set

 When the machine detects Air flow rate higher than set

 When the machine detects The water level in the boiler provides all the moisture. or the water level is lower than the recommendations

 When the machine detects The oxygen supply has a low concentration, low pressure, or higher than 0.60 MPa.

 When the device detects a lower temperature than the user has set

 When the machine detects a higher temperature than the factory has set

 When the machine detects that there is a blockage in the airway This may occur for many reasons. such as a clogged mask

or deteriorated sausage, etc.

– You can choose to view data in 3 graph formats: oxygen concentration over time graph,

Graph showing air flow rate over time. and a graph showing temperature over time

3. Product safety standards

– Manufactured according to international standards ISO 13485 and received CE certification.

4. Equipment for use

– OGM-70E unit (1 unit)

– Quality certificate that has inspected the machine from the factory (1 piece)

– Manual with usage instructions (1 set)

– AC plug cable, length 1.8 meters (1 piece)

– Air filter (2 pieces)

– Nasal oxygen tube For high pressure oxygen machine (2 pieces)

– Humidifying water boiler (1 piece)

– Humidifying water boiler connector (1 piece)

– Air pipe set (1 piece)

– Low pressure oxygen gas connection cable, 1.5 meters long (1 line)

– High pressure oxygen gas connection line (1 line)

Product warranty
Product guaranteed for 2 full years

There is a service repair center. with a team of technicians providing service Ready to give advice How to use 24-hour service

Scroll to Top